Dear customers,
Thank you for using our company’s silver mirror,according to the chemical principle,plating silver layer and copper layer on the high quality float glass or tinted float glass,and then putting double coated for protection,drying at last .The mirror surface is clear and bright, giving distinct and lifelike image. The plating layer is rigid and bond and the protective layer impregnable with good erosion-resistance.
please pay attention to the following when using :
1.Silver mirror only 72 hours after the production can be cut or others processing,please do not scratch the back of the mirror.
2.Please use high grade cutting fluid for cutting.
3.Edging should be sure getting enough cooling water,update periodically(12h/time,best to use deionized water for producing) use good edge grinding wheel,do not dry grind or destory the back paint.
4.Washing immediately after grinding,drying and keep in ventilated place.best to use edging seal on the edge
5.Avoid acid or base corroding when installing the mirror,please use professional mirror glue
6.Back paint do not touch rubber latex directly,also can not put others fluid on the back paint long time.
7.Please keep the silver mirror in the ventilated place inside ,can not put it in outside exposed place and touch acidoid acidic material ,basic compounds,liquor,especially hydrofluoric acid

Warm prompt:if you have any problems above,please feel free to tell us.we will reply you asap.
Chengzhen Mirror Industry Co.,Ltd
Tel:86-0750-8282111